Wall Mounted Sensor Tap – Hands-Free On / Off Demand Sensor with 250mm Spout
Product Information
The Touch Free Wall Mounted Sensor is a wall-mounted, sensor operated, hands-free tap that is installed above sinks and basins.
It operates by sensing a hand, placed within 5 cm of the sensor unit.
It uses a beam of invisible Infrared light which, when reflected from hand back to the sensor, operates the unit.
- To turn tap on, place hand in front of sensor for half a second
- To turn off tap, place hand in front of sensor again for half a second
- Valve stays open without hand remaining in the sensor range
- Maximum flow time 45 seconds, reduces waste and overflow if accidentally activated
- Equipped with automatic hygiene flush function (1-10min/24hr) - enabled on request*
- Stainless steel sensor plate
- WaterMark: AS/NZS 3718 WMKA 1583
- WELS Options include: 4 and 6 Star Rating
Inlet & Outlet
| Inlet Connection | 15mm (1/2") BSP |
Pressure
| Recommended Working Pressure | 100-500 kPa* |
Flow Rate
| Flow Rate | 4 star WELS rating (8 lpm laminar fl ow) supplied standard. 6 Star WELS rating (5 lpm aerated / laminar flow) available on request. |
Temperature
| Maximum Temperature | 70°C* C |
Power Source
| Operating Voltage | 24V DC |
| Maximum Current | 1A |
| Power Consumption | Less than 10W |
IP Rating
| Sensor Protection Rating | IP67 for the front panel and sensor lens. No IP rating behind panel. |
Sensor
| Sensor Range | 20-100mm |
Time Flow
| Flow Time | Place hand in sensor range to activate. Place hand in sensor range again to stop. Maximum of 45 seconds time out per activation. |
| Product Code | Description | FINISH | VALVE | |
|---|---|---|---|---|
| ENM5072A-250 | Wall Mounted Sensor Tap – Hands-Free On / Off Demand Sensor with 250mm Spout | Chrome Plating | Electronic Solenoid | Add to spec |