Izar Radio External Inductive Pulse
Product Information
IZAR Base External PULSE and the IZAR RCi Radio Module
IZAR BE PULSE receives information from a pulse emitter, such as an IZAR PULSE i. It transmits this information in an inductive mode to the radio module clipped on it by simulating the rotation of the half-disc of the meter’s register. The associated radio module transmits the index and the alarms of the meter via a radio link.
Mobile reading in walk-by / drive-by / passive drive-by: The data sent by IZAR BE PULSE + radio module is collected using either a handheld computer or a tablet equipped with an IZAR RECEIVER BT for walk-by / drive-by. It is then transferred directly to a centralized monitoring system, such as IZAR@NET 2 software.
Fixed network: A fixed receiver IZAR RDC BATTERY (EHM008-B(-ET)) or IZAR RDC PREMIUM (EHM008-R2) installed in buildings will collect the data and send it at predefined intervals, via GPRS or LAN, to a centralized server. Reading through M-Bus application with an IZAR CENTER associated to an IZAR RECEIVER M-BUS and IZAR@NET 2 software is also possible. Protocol, frequency, radio range, sending intervals and functions are linked to the type of radio module clipped on the IZAR BE PULSE.
Ideal for gathering readings from difficult to access meters.
- Simple installation
- Transmission of meter data by radio to mobile or stationary receivers
- For all types of meters with pulse transmitter or open collector interface
- On-site-programming using IrDa interface
- Storage and transmission of up to three due date values
- Battery powered with a typical lifetime of 15 years
| Product Code | Description | |
|---|---|---|
| EHM200 | Izar Radio External Inductive Pulse | Add to spec |